- Harvesters[10]
- Chainsaws[10]
- Digging Tools[10]
- Grass Trimmer[10]
- Hedge Trimmer[10]
- Lawn Mower[10]
- Tool Parts[10]
460mm(18'') gasoline garden Hand Push Lawn Mower
hand push lawn mower
2:rated output power:4.1Kw
3:Engine:135CC
4:Cutting Width :460mm(18")
5.Cutting height:25-75mm
Hand Push Lawn Mower
RQ03-LM18 lawn mower | |
Engine | 1P64F |
Engine Type | Single Cylinder,Two-Stroke,Air-cooled ,Gasoline Engine |
Displacement | 135cc |
Power Output | 4.0HP |
Fuel Mixed Ratio | Gasoline:Two-cycle Oil(25:1) |
Carburetor Type | Float |
Drive Type | Hand Push |
Idle Speed | 2850rpm |
Cutting Width | 460mm(18inch) |
Cutting Height | 25-70mm,5 Adjustment(Central) |
Height Adjustment | 1 Lever Adjustment |
Fuel Tank Capacity | 900ml |
Grass Bag Capacity | 6000ml |
Wheel Diameter | Front: 6 inch;Rear: 8 inch |
N.W./G.W. | 36kg/38kg |
Package dimension |
|
Packing Details | 1pc/Carton |
Loading Quantity | 175pcs/20FT,365pcs/40FT |
1).Gasoline, oil use separately:
Power lawn mowers for the fourstroke gasoline, gasoline, oil separately using. Using more than 90 # gasoline, the four
stroke engine oil, signs for the 4T, do not use two-stroke engine oil.
2).Oil fill:
Oil is the key to a good lawn mower, do not start without filling the oil, prior to each use check the oil level.
Must strictly follow the oil filling gauge, the oil must be controlled within the scope of a slash between the online and offline, it is better to keep up with line flush. Too much oil will cause the exhaust pipe with exhaust smoke,
engine overheat, air filter oil susceptible to choking humidity, which affect horsepower, more serious filter will be absorb
into the air, resulting in the inability to affect the machine. Oil is less than offline, will cause the machine cylinder, connecting
rod will cause severe breakage, cylinder damage. Oil brand motor oil is recommended, such as Mobil 1130, or label for the
type of engine oil 10W40.
3).the regular replacement of oil:
Before using the new machine should be running at low speed for 20 minutes, change for new oil after 5 hours using. Starting
machine for a few minutes,then shut down (in the hot state machine for oil clean and completely), the whole direction of the tilt
foot oil, or use tools to put the bottom of the oil dipstick loose screws to release the oil. Change the oil after every 50 hours.
4).Air Filter:
Every 8 hours, you should clean the air filter. Paper should be replaced every 50 hours air filter. Paper air filters can not be cleaned
with liquid detergent only to tap. Air filter sponge can be dried before using with gasoline. Note need to clean and highly skewed, the
only air filter side up, try their hand to prevent the air filter oil.
5).Spark plug:
Spark plugs should be cleaned half a coke, and replaced every year.
6).Blade sharpening and balancing
Blade in use for some time, if the blade is blunt ,it should be sharpened. Note the balance on both sides of the blade, tighten the screws fixed blade.
7).The use of safety:
Before using, you should first clean the bricks, angle iron, stumps and other foreign matter on the grass. No one is walking around with 15m when using.
Do not filling petrol in the room, spilling gasoline should be wiped clean. Do not smoke at work. Put on protective clothing, and wear glasses.